Saudi cement sales up 5% to 12.84m tonnes amid sustainability drive

Saudi cement sales up 5% to 12.84m tonnes amid sustainability drive
On average, the cement industry in Saudi Arabia is using just over two-thirds of its available production capacity. Shutterstock
Short Url
Updated 22 November 2024
Follow

Saudi cement sales up 5% to 12.84m tonnes amid sustainability drive

Saudi cement sales up 5% to 12.84m tonnes amid sustainability drive

RIYADH: Cement sales in Saudi Arabia saw an annual increase of 4.93 percent in the third quarter of 2024, reaching 12.84 million tonnes, according to recent data.

Figures released by Al-Yamama Cement showed that 96.18 percent of these sales were domestic, with only 3.82 percent being exported.  

The data covers 17 Saudi cement companies, with Al-Yamama Cement holding the largest share of domestic sales at 12.47 percent, amounting to 1.54 million tonnes, despite experiencing a 27.18 percent decline during the period.

With the successful acquisition of Hail Cement Company by Qassim Cement Company, QCC now leads the market with the highest share among its peers at 13.37 percent, or 1.65 million tonnes, moving Al-Yamama Cement to second place.

Saudi Cement, Southern Cement and Yanbu Cement held 8.96 percent, 8.49 percent and 8.18 percent shares of the domestic market respectively.

The highest growth in domestic sales was recorded by Umm Al-Qura Cement, which saw a 69 percent increase to 372,000 tonnes during this period, despite holding a relatively small 3 percent market share.

City Cement’s local sales rose by 52.69 percent annually to 739,000 tonnes, while Tabuk Cement experienced a 27.3 percent increase, reaching 429,000 tonnes.  

In terms of cement exports, Saudi Cement dominated with 80.45 percent of total shipments, amounting to 395,000 tonnes this quarter.  This figure represents a 13.18 percent increase compared to the same quarter last year.   

Najran Cement accounted for 11 percent of exports for the quarter, totaling 54,000 tonnes, marking a 24 percent decline. Eastern Cement with 8.55 percent share saw a 133 percent rise in exports, reaching 42,000 tonnes. 

Saudi Arabia also exported 1.08 million tonnes of clinker during this period, marking a 41 percent decline compared to the same period last year.

Clinker, a crucial intermediate product in cement production, is commonly exported due to its cost-effectiveness. It is more economical to ship it to other countries for final processing into cement than to produce the finished product and then export.

According to a report by AlJazira Capital, the total utilization rate of the cement sector in Saudi Arabia stood at 72.8 percent in September. 

This figure represents the proportion of the cement production capacity that is actively being used to meet demand.

A utilization rate of 72.8 percent indicates that, on average, the cement industry in Saudi Arabia is using just over two-thirds of its available production capacity.

Saudi Arabia is a prominent player in the global cement industry, ranking among the top 10 producers worldwide. The Kingdom’s production capacity has been bolstered by significant investments to meet both domestic demand and export opportunities.

Key factors driving Saudi Arabia’s cement industry include its robust infrastructure development, housing projects, and initiatives under Vision 2030, which aim to diversify the economy and reduce reliance on oil revenues.

Saudi Arabia’s path to decarbonization

In October, Saudi Arabia’s cement sector took a significant leap towards decarbonization with the announcement of a joint venture between the UK’s Next Generation SCM and Nizak Mining Co., a subsidiary of City Cement.

The collaboration is focused on producing supplementary cementitious materials locally, utilizing an innovative, energy-efficient technology.

This new method requires only one-sixth of the fuel compared to conventional cement production and operates at lower temperatures, significantly reducing operational costs and carbon emissions.

The technology already demonstrates a 99 percent reduction in emissions, producing just 8 kg of CO2 per tonne of calcined clay, compared to the global average of 600 kg per tonne.

The joint venture is part of the Kingdom’s broader decarbonization strategy, which is aligned with Vision 2030 and the Saudi Green Initiative.

As part of these proposals, the Kingdom has set an ambitious goal of cutting carbon emissions by 278 million tonnes annually by 2030.

This venture, which will have its first production plant in Riyadh, is expected to produce up to 700,000 tonnes of low-carbon supplementary cementitious materials in its second year of operations, starting in 2025.

The project is also crucial for the domestic production of low-carbon concrete, as traditional SCM alternatives, like fly ash and slag, are not readily available in Saudi Arabia.

The venture will not only help Saudi Arabia meet its sustainability targets but also strengthen its position as a regional hub for low-carbon materials, generating both economic and environmental benefits.

Speaking in October, Majed Al-Osailan, CEO of City Cement, emphasized the long-term impact of the project, stating that it will create jobs, improve access to sustainable building materials, and create export opportunities for the Kingdom.

According to a study by the Boston Consulting Group in September, Saudi Arabia stands to gain a significant competitive advantage in the global cement industry as the sector moves toward decarbonization through carbon capture and storage.

The competitive dynamics of the industry are shifting due to the high costs associated with CCS, which is essential for achieving net-zero emissions by 2050.

One of the primary factors influencing future competitiveness is a plant’s proximity to CO2 storage sites.

Cement plants located within 200 km of CCS hubs could see abatement costs reduced by half compared to those located farther away.

This geographical advantage will be crucial in determining cost competitiveness on a global scale.

Saudi Arabia, with its lower energy costs, is well-positioned to capitalize on this advantage according to the study. The Middle East, in general, benefits from cheaper energy, which could give Saudi plants a $20 per tonne cost advantage in CCS over the global median.

This would allow Saudi Arabia to emerge as a key export hub in the global cement market. 

Plants in the Kingdom that can minimize their CCS abatement costs will be internationally competitive, particularly as global trade dynamics shift and demand grows for low-carbon cement.

Moreover, Saudi Arabia’s energy infrastructure and strategic location near key shipping routes bolster its potential as a regional and global supplier of cement.

With substantial investments in CCS technology and renewables, the Kingdom could not only meet domestic demand but also serve international markets more efficiently, securing its position in the evolving global cement trade.

As the cost of CCS implementation rises, the global competitive landscape will be reshaped, with plants closer to CO2 storage hubs and renewable energy sources becoming more attractive.

Saudi Arabia’s competitive edge, therefore, lies in its ability to leverage its energy resources and strategic location, potentially making it a leader in the export of low-carbon cement solutions.


Saudi Arabia approves budget for 2025

Saudi Arabia approves budget for 2025
Updated 23 sec ago
Follow

Saudi Arabia approves budget for 2025

Saudi Arabia approves budget for 2025

RIYADH: Saudi Crown Prince Mohammed bin Salman on Tuesday approved the Kingdom’s budget for 2025 projecting revenues at SR1.18 trillion ($315.73 billion) and expenditures at SR1.28 trillion, resulting in a deficit of SR101 billion.


Closing Bell: Saudi main index closes in red at 11,736 

Closing Bell: Saudi main index closes in red at 11,736 
Updated 31 min 23 sec ago
Follow

Closing Bell: Saudi main index closes in red at 11,736 

Closing Bell: Saudi main index closes in red at 11,736 

RIYADH: Saudi Arabia’s Tadawul All Share Index slipped on Tuesday, with the index shedding 51.65 points to close at 11,736.07. 

The total trading turnover of the benchmark index was SR5.15 billion ($1.37 billion) with 54 of the listed stocks advancing, while 179 declined.

The Kingdom’s parallel market Nomu also slipped by 0.85 percent to 30,602.83, while the MSCI Tadawul Index inched down by 0.22 percent to 1,474.39.  

The best-performing stock on the main market was Riyadh Cables Group Co., with its share price surging by 7.56 percent to SR128.  

Media giant MBC Group’s share price soared by 6.83 percent to SR50.80, while the stock price of Elm Co. increased by 4.03 percent to SR1,105.  

Conversely, the share price of Jadwa REIT Saudi Fund slipped by 5.12 percent to SR10.38.  

On Nomu, the top gainer was Miral Dental Clinics Co. The firm’s share price increased by 14.63 percent to SR113.60. 

In announcements, the Saudi Investment Bank stated that it has completed the debut offering of its $750 million dollar-denominated Tier 1 Sustainable Sukuk, issued under its $1.5 billion Additional Tier 1 Sukuk Program. 

The bank confirmed that the offering will be settled on Nov. 27, and the sukuk will be listed on the London Stock Exchange’s International Securities Market. 

SAIB’s share price rose by 0.57 percent on Tuesday, closing at SR14.04. 

Saudi Reinsurance Co. announced that it has received approval from the Kingdom’s Capital Market Authority to increase its capital by offering 26.73 million shares, while suspending preemptive rights, at a value of SR427.68 million. 

The reinsurance firm’s share price increased slightly by 0.11 percent to SR45.50. 

Tamkeen Human Resources Co. stated that it will begin trading on Saudi Arabia’s main market on Nov. 27. 

The daily and static fluctuation limits for the company’s stocks will be set at 30 percent and 10 percent, respectively, during the first three days of trading. 

From the fourth day, the daily price fluctuation limits will revert to ±10 percent, and the static price fluctuation limits will no longer apply. 


Saudi Arabia clinches 3rd-term presidency of Arab States Aviation Security Committee

Saudi Arabia clinches 3rd-term presidency of Arab States Aviation Security Committee
Updated 44 min 28 sec ago
Follow

Saudi Arabia clinches 3rd-term presidency of Arab States Aviation Security Committee

Saudi Arabia clinches 3rd-term presidency of Arab States Aviation Security Committee

JEDDAH: Saudi Arabia has been awarded the presidency of the Aviation Security Committee for a third consecutive term following a unanimous vote by member states.

The announcement was made during the recent 40th committee meeting held at the Arab Civil Aviation Organization’s headquarters in the Moroccan capital, Rabat. 

The result underscores the Kingdom’s pivotal role and constructive efforts in dealing with regional and global developments in the aviation industry, according to the Saudi Press Agency.

It also underlines the Kingdom’s international standing in forums related to civil aviation and its engagement in specialized international organizations in the field.

Commenting on the reappointment, the General Authority of Civil Aviation’s executive vice president Mohammed Al-Fozan – who also serves as chairman of the Cooperative Aviation Security Program in the Middle East – underlined the significance of enhancing collaborative Arab efforts in aviation transportation security.

He also spoke of the importance of maintaining continuous communication to uphold the highest safety standards.

The vice president explained that Saudi Arabia, a member of ACAO since its creation in 1996, has been working to support the international organization’s efforts through active participation, coordination, and involvement in its corporate structures, the executive council, and its technical committees.

He assured that the Kingdom will continue its efforts to develop and support the Arab League-affiliated organization, enhance its international leadership role, and collaborate with stakeholders to strengthen the industry.

The Kingdom’s civil aviation sector saw a 17 percent annual increase in the first half of 2024 as it reached 62 million passengers, driven by rising domestic and international travel demand.

According to GACA, the period also saw 446,000 flights, a 12 percent rise compared to 2023.

Additionally, air cargo traffic at the country’s airports surged by 41 percent, reaching 606,000 tonnes during the same period.

These developments support Saudi Arabia’s aviation goals, which include tripling annual passenger numbers to 330 million, expanding connectivity to over 250 destinations from its 29 airports, and increasing air freight capacity to 4.5 million tons annually by 2030.

According to GACA, Saudi Arabia remains committed to supporting global civil aviation through various programs and initiatives. 

This includes deploying experts to work with specialized bodies, hosting the permanent headquarters of the International Civil Aviation Organization’s CASP-MID, and housing the permanent hub of the Regional Safety Oversight Organization for the Middle East and North Africa.

SPA also highlighted the Kingdom’s $1 million contribution to ICAO under the “No Country Left Behind” initiative. 


Saudi Arabia signs over $9.3bn in deals to boost supply chain resilience

Saudi Arabia signs over $9.3bn in deals to boost supply chain resilience
Updated 38 min 29 sec ago
Follow

Saudi Arabia signs over $9.3bn in deals to boost supply chain resilience

Saudi Arabia signs over $9.3bn in deals to boost supply chain resilience

RIYADH: Saudi Arabia has signed nine major agreements valued at SR35 billion ($9.31 billion) during the Global Supply Chain Resilience Initiative forum in Riyadh. The deals aim to enhance global trade connectivity and diversify the Kingdom’s economy.

The agreements span key sectors, including copper smelting, aluminum production, and rare earth processing. These projects align with GSCRI’s goal of attracting SR150 billion in export-focused investments by 2030. Saudi Arabia’s significant progress in logistics is reflected in its 17-place jump to 38th position in the World Bank’s 2023 Logistics Performance Index.

Key agreements

Notable agreements include ventures in copper smelting, refining, and rod production with Vedanta; titanium projects with Advanced Metals Industries Cluster and Tasnee; and rare earth processing facilities with Hastings. Other key deals involve semi-finished aluminum plants with Red Sea Aluminum and an aluminum foil rolling plant with Tahweel.

Further investments include zinc smelting opportunities with Moxico, a platinum group metals smelter and base metals refinery with Ajlan & Bros and Platinum Group, and lithium carbonate extraction along with a copper refinery project with Zijin Group.

One of the highlights of the forum is the signing of a deal to establish a state-of-the-art manufacturing facility with GlassPoint, marking the first step toward building the world’s largest industrial solar thermal project.

Strategic vision

Saudi Investment Minister Khalid Al-Falih emphasized that while globalization is ongoing, it is evolving into a new phase characterized by regionalization and the clustering of supply chains. “In the future, supply chains will be centered around where raw materials, energy, human resources, and capital coexist in an enabling business environment,” he said.

Al-Falih also highlighted the important roles of companies backed by the Public Investment Fund (PIF), such as Manara and Alat, in advancing sectors like mining and digital manufacturing.

Industrial and mining growth

Minister of Industry and Mineral Resources Bandar Alkhorayef reaffirmed Saudi Arabia’s ambition to become a leading industrial player on the global stage. “The country is focused on expanding its industrial base, entering new sectors, and playing a key role in global challenges, particularly in mining,” he stated.

As part of this vision, the Ministry of Industry and Mineral Resources has announced the qualification of both local and international firms to compete for exploration licenses in key mineralized areas, including Jabal Sayyad and Al-Hajar, which cover a combined 4,788 square kilometers. Eligible companies include Zijin Mining Group, Hancock Prospecting, and First Quantum Minerals.

Enhancing supply chain resilience

Minister of State Hamad Al-Sheikh underscored Saudi Arabia’s commitment to strengthening its logistical infrastructure and enhancing global supply chain resilience. He outlined several national strategies aimed at attracting both local and international investment, including the National Industrialization Strategy, the National Investment Strategy, the National Transportation and Logistics Strategy, and the National Agricultural Strategy.

However, Al-Sheikh also cautioned about the challenges posed by shifting market dynamics, geopolitical influences, and environmental considerations. “We must remain aware of the challenges arising from rapid changes in the global supply chain landscape,” he warned.

Launched in October 2022, the GSCRI initiative aims to position Saudi Arabia as a global supply chain hub by capitalizing on its strategic advantages and mitigating the impact of global disruptions. This initiative is an integral part of the ongoing 28th World Investment Conference in Riyadh, which continues until Nov. 27.


India’s Vedanta Copper to invest $2bn in Saudi mining sector

India’s Vedanta Copper to invest $2bn in Saudi mining sector
Updated 26 November 2024
Follow

India’s Vedanta Copper to invest $2bn in Saudi mining sector

India’s Vedanta Copper to invest $2bn in Saudi mining sector

RIYADH: Saudi Arabia’s Ministry of Investment and Ministry of Industry and Mineral Resources have joined forces with Vedanta Copper International, a subsidiary of India’s Vedanta Ltd., to develop $2 billion worth of copper projects in the Kingdom.

The collaboration, formalized through a memorandum of understanding, represents a significant step toward advancing Saudi Arabia’s Vision 2030, which seeks to diversify the country’s industrial and mineral resources sectors.

The investment will focus on the construction of a 400,000-tonnes-per-year copper smelter and refinery, as well as a 300,000-tonnes copper rod production facility. These projects will be located in Ras Al-Khair Industrial City and are intended to reduce Saudi Arabia’s reliance on copper imports, addressing the Kingdom’s growing demand for the metal.

Currently, Saudi Arabia imports most of its annual copper requirement of 365,000 tonnes, a figure expected to more than double by 2035. This partnership will help bridge that gap and strengthen the Kingdom’s domestic copper supply.

In a broader context, these initiatives align with Saudi Arabia’s goal of unlocking its vast, untapped mineral resources, which are estimated to be worth $1.3 trillion. The country aims to increase the mining sector’s contribution to its GDP from $17 billion to $64 billion by the end of the decade.

The projects also support Vision 2030’s broader industrial diversification goals, which are focused on reducing the Kingdom’s dependence on oil revenues and fostering growth in non-oil sectors.

“We are excited and honored to collaborate with the Kingdom of Saudi Arabia in its Vision 2030 initiative,” said Chris Griffith, CEO of Base Metals at Vedanta Ltd.

“Our projects will enhance the Kingdom’s self-reliance in the copper supply chain. Saudi Arabia has been a leader in oil exploration for decades, and now, under visionary leadership, it is ready to tap into its untapped mineral potential, as it embraces the 4th Industrial Revolution.”

Vedanta Copper has already welcomed senior officials from Saudi Arabia’s Ministry of Industry and Mineral Resources, as well as the National Industrial Development Center, to its operations in India. These visits have paved the way for further high-level discussions and planning.

The first phase of the project will involve the construction of a 125,000-tonnes-per-year copper rod mill, requiring an investment of approximately $30 million. Vedanta has confirmed that all necessary approvals have been obtained, land has been acquired, and technology orders have been placed. Construction is expected to begin soon, with commercial production slated to start by the fourth quarter of fiscal year 2025-26.

Beyond the copper rod mill, Vedanta’s broader investment in copper smelting, refining, and rod manufacturing is expected to generate thousands of new jobs and stimulate the development of hundreds of downstream industries in Saudi Arabia.

Over the long term, these projects are projected to contribute approximately $19 billion to the Kingdom’s gross domestic product while helping achieve its goal of self-sufficiency in copper production.